(Download MultiRib T-Bar information)
(Download 6mm Traditional T Sections Brochure)
(Download 10mm Traditional T Sections Information)
(Download T Section Stock Sizes Comparison Table)

Treco Steel carries the largest range of hot dipped galvanised T sections on the east coast of Australia including the Galintel Multi-Rib T-Bar.

Galintel Multi-Rib T-Bars are cost effective lintels that provide structural rigidity, high strength-to-weight ratio and resistance to corrosion. The multi-ribbed profile forms a superior bond with the mortar. This bond between mortar, brickwork and lintel creates a composite beam of superior strength and structural integrity. The Galintel Multi-Rib T-Bar is a total load bearing lintel designed to support 230mm brickwork over a clear opening.

Treco Steel’s range of traditional T lintels have been developed as a structural member with all surfaces, including ends, fully hot-dip galvanised resulting in a R3 durability finish.
(v=vertical, b=base)

T Sections 200 x 6 (v) + 200 x 6 (b)
900mm, 1200mm, 1500mm, 1800mm, 2100mm, 2400mm.

T Sections 200 x 8 (v) + 200 x 6 (b)
2700mm, 3000mm, 3300mm, 3600mm, 3900mm.

T Sections 200 x 10 (v) + 200 x 6 (b) *
4200mm, 4500mm, 4800mm, 5100mm, 5200mm, 5400mm, 5700mm.

Galintel MultiRib T Bars 200 x 200 x 7mm
900mm, 1200mm, 1500mm, 1800mm, 2100mm, 2400mm, 2700mm, 3000mm, 3300mm.

Galintel MultiRib T Bars 200 x 200 x 9mm
3600mm, 3900mm, 4200mm, 4500mm, 4800mm, 5100mm, 5400mm, 5700mm, 6000mm, 6300mm.

T Bars 200 x 10 (v) + 200 x 10 (b)
2700mm, 3000mm, 3300mm, 3600mm, 3900mm, 4200mm, 4500mm, 4800mm, 5200mm, 5400mm, 5700mm, 6000mm, 6300mm.

T Bars 250 x 10 (v) + 200 x 10 (b)
5200mm, 5400mm, 5700mm, 6000mm, 6300mm.

T Bars 250 x 12 (v) + 200 x 10 (b)
5200mm, 5400mm, 5700mm, 6000mm.

* Please note that there are no load tables available for the 200 x 10 (v) + 200 x 6 (b) T Sections.