“H” and “C” Retaining Wall Posts with 45 and 90 Degree Corner Posts
| RETAINING WALL POSTS |
Do you want to make sure that your retaining wall is structurally sound? Then, be sure to start with the Treco Steel range of retaining wall posts for 75mm sleepers. Treco Steel uses hot-dip galvanised structural sections for its “H” and “C” sections. The section dimensions are as follows:
Technical |
Kgs |
Web Thickness |
Flanges Thickness |
Depth |
Cover |
|
|---|---|---|---|---|---|---|
"H" |
100 UC 14.8 |
14.8/mtr |
5.0 mm |
7.0 mm |
83 mm |
47 mm |
"C" |
100x50PFC |
8.33/mtr |
4.2 mm |
6.7 mm |
86 mm |
46 mm |
Stock Lengths: 900mm, 1200mm, 1500mm, 1800mm, 2100mm, 2400mm, 3000mm.
Treco Steel also stocks 45 and 90 degree corner posts. These corner sections are manufactured using that same structural 100x50 parallel flange channels as the “C” sections. They are stocked in the same lengths as the “H” and “C” sections and suit 75mm sleepers.
The 90 degree corners weigh 18.72 kgs per mtr while the 45 degree corners weigh 22.25 kgs per metre.
For all other corners, we recommend placing two “C” sections in the concrete footing at the angle required.
lintels / galvanised ribbed lintels and galvanised arch bars / Rendabar and concrete lintels /
Tyvek HomeWrap / Tyvek FlexWrap / Tyvek Flashing Tape / Tyvek Contractor Tape / Shelf Angle /
Galintel MultiRib T Bars and galvanised T lintels / Cavi T Bar and J Bar /
galvanised retaining wall posts / galvanised drain and DuraGal fence posts /